|
|
Instruction of Double Twisted Barbed Wire Machine |
 |
 |
Use and capabilty:
GB/T343-requires the common hot dipped galvanized low carbon stell wire . The products can be used in the national defence , railroad , highway , stockbreeding and agriculture and so on.
CS-A barbea wire machine is make up by spool wire and twist wire two parts . The machine can produce all kinds of barbed wires . At present , just this kind of machine can produce the barbed wire mesh.
Technical Parameter
(1) Paramete of CS-A model barbed wire mesh machine |
No |
Items |
Unit |
Parameter |
1 |
electromotor |
Modle |
Y10012-4 |
2 |
electromotor |
KW |
3 |
3 |
Speed of transmission shaft |
time/min |
402 |
4 |
Speed of spooling barbed wire |
time/min |
470 |
5 |
Speed of pulling rope |
mime/min |
134 |
6 |
Speed of round pallet |
time/min |
30-255 |
7 |
Size of the main machine |
mm |
1900*1300*980 |
8 |
Size of the pull wire machine |
mm |
1800*750*750 |
Note : Special need should discuss by seller and buyer |
(2) The specification of CS-A model barbed wire mesh machine |
No |
Items |
Unit |
Parameter |
1 |
Distance between barbs |
cm |
6-15 |
2 |
Twist |
Number |
4 |
3 |
Diameter of chief wire |
Mm |
1.8-3.0 |
4 |
Diameter of barb wire |
mm |
1.6-2.6 |
Straight and Reverse Twisted Barbed Wire Machine
This machine is used to produce double strand straight and reverse twisted barbed wire. The material used is low carbon steel wire meeting the standard of GB/T343-94. Finished products made by this machine are widely used as fencing and protecting materials in national defense, railway, expressway, agriculture and animal feeding.CS-C Model Straight and Reverse Twisted Barbed Wire Machine is composed by two parts including straight and reverse twisting, barb winding and taking in. The machine is fitted with four disks for wire rewinding.
This machine is easy for operation, with low noise, less cost of energy. A kind of digital controlled machine to produce straight and reverse twisted barbed wire. |
 |
|
Technical Parameter of CS-C Model Barbed Wire Machine |
No. |
Item |
Unit |
Fundamental Parameter |
1 |
Motor |
Model |
Y100L2-4 |
2 |
Motor |
KW |
2.2 |
3 |
Main Drive Shaft Speed |
r/min |
357 |
4 |
Wire Drawing Rate |
T/min |
125 |
5 |
Rotating Degree of Takingup Speed |
|
Friction gathering |
6 |
Theoretical Yield |
Kg/h |
50 |
7 |
Main Engine Section |
mm |
1900X1300X980 |
8 |
Wire Takingup Section |
mm |
1300X800X700 |
Specification of CS-C Model Barbed Wire Machine |
No. |
Item |
Unit |
Technical Index |
1 |
Distance between barbs |
cm |
8-15 |
2 |
Twisting |
number |
4 |
3 |
Diameter of chief wire |
mm |
1.6-2.6 |
4 |
Diameter of barb wire |
mm |
1.6-2.3 |
|
